color: blue; Material: metal + plastic
DUET2 V1.04 Motherboard description:The DuetWifi is an advanced 32 bit electronics for the control of 3D printers and other CNC machines. It has the same features as the Duet Ethernet other than providing a WiFi connectivity rather than ethernet, full feature description is available on our wiki, in summary:Powerful 32 Bit Processor; Dedicated Wifi module
Super quiet TMC2660 stepper drivers, up to 256 microstepping.High speed SD card and support for a second SD external card if required.Dual extruders on the main board, up to 5 more extruders on the expansion board.High Power rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2.4A. The bed heater channel is specifically designed for high current (18A).
Connect via PC, tablet or smartphone on the same network to the on board web interface.
Setup your printer and update the firmware through the web interface.All common 3D printer geometries are supported; Expandable up to 7 extruders with Firmware support for mixing nozzles and remapping axes to use high power external drivers.Support for the PanelDue: a full colour graphic press screen
Provided with Molex compatible plugs and crimps as well as ferrules for power and heater terminals.
Based on the DuetWifi by Think3d Print 3d and Esher 3d. This reproduction/modification is not endorsed or supported in any way by Think 3d Print 3d or Escher 3d".
The Duex 2 and Duex 5 are based on the same PCB with 3 channels of steppers, heaters fans etc not populated on the Duex 2 to save costs.
5 additional TMC2660 stepper motor drivers with stall notification.
5 additional extruder heater outputs.
5 servo outputs with 5V power and 5V signal levels, sharing control channels with the heaters. So you can use unused heater channels to drive servos.
5 additional endstop inputs with indicator LEDs and 3.3V/5V voltage selection. These are also usable as outputs.
6 additional PWM controlled fan outputs*, also usable for driving LEDs etc. The output voltage may be switched between 5V, 12V and VIN .
4 uncommitted general purpose I/O pins.
12V 2A switching regulator, for generating a 12V supply for fans, LEDs etc. when the VIN power is higher than 12V.
5 additional thermistor inputs.
Support for 2 more thermocouple or PT100 daughter boards, supporting up to 4 more sensors.
Optional 5V external power input for powering servos, fans etc.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.